Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Terry,<br>Swapping the circuit breakers initially worked for me too. Days later the problem resurfaced. The fuse link they repaired required the dealer to remove the fuse box and solder the replacement in. Glad to hear your running; check with your dealer and please pass along the outcome.<br>Thanks,<br>Lou

4400 cuts off
John Deere Tractors
Replies 8 Post by Lou Panuski

When my 4300 HST was new, under 10 hours, I had a similar problem. In the middle of cutting grass, box scraping, what ever, the engine would stall as if someone turned the ignition off. After several minutes of cooling, the engine would start again. I took mine to the dealer where attempts to adjust microswitches, changing fuel solenoids, etc., were unsuccessful. Later, a JD factory tech told my service technician to check a thermal fuse located behind the fuse panel. Apparently this safety device was overtemping and killing the ignition. The dealer replaced the fuse link. Since the repair, I have been trouble free at 150 hours. Good luck with yours, I hope this helps. Let us know your outcome.<br>Lou

New JD4300 HST Engine Quits Under Light Load
John Deere Tractors
Replies 3 Post by Lou Panuski

Hi,<br>I have a 4300 HST with the same problem. If I move the SCV left and right, or up and down, I can get it to fall into the lock position. Now that I have read your complaint, I'll have my dealer check mine out. My machine is having the recall work done now.<br>Lou<br>

JD 4000-series hydraulic lockout problem
John Deere Tractors
Replies 2 Post by Lou Panuski